CALCULATE WITH CONFIDENCE

Engineering · Stress, Failure & Materials

Materials Behavior Workbench Calculator

Reconcile linear elasticity, thermal strain, Poisson response, bulk/shear relationships, fracture stress intensity and simple strain-energy density.

Engineering · Stress, Failure & Materials

Enter the engineering model

Explicit properties, geometry, units and assumptions
  1. 1EnterProvide the known values
  2. 2CalculateResults update automatically
  3. 3VerifyReview the details and units
Try an example
Visual modelSchematic · not to scale
Stress, Failure & Materials: hooke visual explanationA simplified diagram showing the relationship represented by the selected calculator mode. It is explanatory and not a fabrication, safety or scale drawing.Mohr-circle schematicprincipal axes and maximum shear
The diagram explains the selected relationship only. Dimensions, symbols and proportions are illustrative; use the entered values and stated assumptions for the calculation.

Keep every unit basis, sign convention, property source and idealization consistent. Values stay in this browser.

Engineering calculation result

—

Enter valid values to see the result.

Your entries are calculated in this browser and are not submitted to 365CALCS.COM.

Feedback

Understand the engineering model

What this calculator is for

Reconcile linear elasticity, thermal strain, Poisson response, bulk/shear relationships, fracture stress intensity and simple strain-energy density. The workflow keeps every assumed property, state and coefficient visible so the result can be independently checked.

1Match the displayed relationship to the real system before entering data.
2Use one consistent unit basis and preserve absolute quantities where stated.
3Compare the intermediate results and retain the model boundary.

Visual explanation

The tailored schematic shows the direction of energy, signal, state change or reliability logic represented by the selected equation.

The governing relationship

σ=Eε; εth=αΔT; ν=−εtrans/εaxial; K=E/[3(1−2ν)]; G=E/[2(1+ν)]; KI=Yσ√(πa).

Keep the boundary visible

Ideal homogeneous material relationships only. Plasticity, anisotropy, defects, environment, fatigue, property qualification and allowable design remain external.

Quick guide

How to use this calculator

  1. Choose the analysis mode that matches the physical model before entering values.
  2. Enter properties, geometry, loads, states and coefficients from one consistent unit and sign convention.
  3. Use the intermediate outputs to audit the relationship, then retain the stated idealization before applying it.

Calculation method

Transparent engineering model

σ=Eε; εth=αΔT; ν=−εtrans/εaxial; K=E/[3(1−2ν)]; G=E/[2(1+ν)]; KI=Yσ√(πa).

The calculator evaluates only the declared relationship and preserves visitor-entered assumptions rather than selecting materials, factors, components or standards.

Worked example

Worked example

Steel with E=200 GPa at 0.001 axial strain has 200 MPa ideal linear-elastic stress.

σ=Eε; εth=αΔT; ν=−εtrans/εaxial; K=E/[3(1−2ν)]; G=E/[2(1+ν)]; KI=Yσ√(πa).

Supported inputs

Precision and limits

Analysis, not approval

Ideal homogeneous material relationships only. Plasticity, anisotropy, defects, environment, fatigue, property qualification and allowable design remain external.

Standards and properties

Material properties, allowable values, load combinations, safety factors, correlations, manufacturer data, codes and jurisdictional requirements are not supplied automatically.

Units and precision

Use one consistent unit basis. Results retain working precision but cannot be more accurate than the entered measurements and properties.

Privacy

Entered engineering values and results stay in this browser and are not sent to analytics or third parties.