CALCULATE WITH CONFIDENCE

Engineering · Reliability, Maintainability & Metrology

ADC Resolution, Quantization and Signal Scaling Calculator

Calculate ideal ADC code, LSB size, quantized voltage and engineering-value scaling.

Engineering · Reliability, Maintainability & Metrology

Enter the engineering model

Explicit properties, geometry, units and assumptions
  1. 1EnterProvide the known values
  2. 2CalculateResults update automatically
  3. 3VerifyReview the details and units
Try an example
Visual modelSchematic · not to scale
Reliability, Maintainability & Metrology: adc visual explanationA simplified diagram showing the relationship represented by the selected calculator mode. It is explanatory and not a fabrication, safety or scale drawing.series chain / entered performance factors
The diagram explains the selected relationship only. Dimensions, symbols and proportions are illustrative; use the entered values and stated assumptions for the calculation.

Keep every unit basis, sign convention, property source and idealization consistent. Values stay in this browser.

Engineering calculation result

—

Enter valid values to see the result.

Your entries are calculated in this browser and are not submitted to 365CALCS.COM.

Feedback

Understand the engineering model

What this calculator is for

Calculate ideal ADC code, LSB size, quantized voltage and engineering-value scaling. The workflow keeps every assumed property, state and coefficient visible so the result can be independently checked.

1Match the displayed relationship to the real system before entering data.
2Use one consistent unit basis and preserve absolute quantities where stated.
3Compare the intermediate results and retain the model boundary.

Visual explanation

The tailored schematic shows the direction of energy, signal, state change or reliability logic represented by the selected equation.

The governing relationship

codes=2ᴺ; LSB=Vspan/(codes−1); code=round((Vin−Vmin)/LSB).

Keep the boundary visible

Ideal endpoint-inclusive unipolar conversion; offset, gain error, INL, DNL, noise, reference error and saturation behavior are excluded.

Quick guide

How to use this calculator

  1. Choose the analysis mode that matches the physical model before entering values.
  2. Enter properties, geometry, loads, states and coefficients from one consistent unit and sign convention.
  3. Use the intermediate outputs to audit the relationship, then retain the stated idealization before applying it.

Calculation method

Transparent engineering model

codes=2ᴺ; LSB=Vspan/(codes−1); code=round((Vin−Vmin)/LSB).

The calculator evaluates only the declared relationship and preserves visitor-entered assumptions rather than selecting materials, factors, components or standards.

Worked example

Worked example

A 12-bit 0–10 V converter has 4096 codes and an endpoint-inclusive step near 2.442 mV.

codes=2ᴺ; LSB=Vspan/(codes−1); code=round((Vin−Vmin)/LSB).

Supported inputs

Precision and limits

Analysis, not approval

Ideal endpoint-inclusive unipolar conversion; offset, gain error, INL, DNL, noise, reference error and saturation behavior are excluded.

Standards and properties

Material properties, allowable values, load combinations, safety factors, correlations, manufacturer data, codes and jurisdictional requirements are not supplied automatically.

Units and precision

Use one consistent unit basis. Results retain working precision but cannot be more accurate than the entered measurements and properties.

Privacy

Entered engineering values and results stay in this browser and are not sent to analytics or third parties.