Quick guide
How to use this calculator
- Enter the value exactly as recorded, then choose its source unit and the unit you need.
- Check regional and technical qualifiers in the unit names. US and Imperial gallons, force and mass, absolute temperatures and temperature differences, and decimal and binary data prefixes are deliberately separate.
- Use the selected result first, then open the common-equivalents table when you need to compare several standards without re-entering the value.
Calculation method
How the kinematic viscosity converter works
The entered kinematic viscosity is converted once to the canonical square metre per second basis and then from that basis to the selected output unit.
Converting between dynamic and kinematic viscosity requires density at the same conditions.
Worked example
Kinematic Viscosity example
A kinematic viscosity of 1 cSt equals exactly 1 mm²/s.
source value × source-to-square metre per second relationship → canonical square metre per second value → destination-unit relationship
Supported inputs
Precision and limits
Unit convention
Converting between dynamic and kinematic viscosity requires density at the same conditions.
Precision
Definitions and exact conventional factors are retained internally where available. Display formatting uses up to 12 significant digits; very large or small results use scientific notation. Do not treat displayed digits as measurement accuracy beyond the source value.
Quantity boundary
This page converts kinematic viscosity. It does not infer a different physical quantity, material property, environmental condition, exchange rate, calendar rule, or regulatory value needed to make a cross-quantity conversion.
Privacy
Entered values and converted results stay in this browser and are not sent to analytics or third parties.
Continue calculating