Trades & Professional Tools · Surveying & Construction Layout
Survey Intersection Workbench Calculator
Solve a distance-distance intersection from two known control points.
Trades & Professional Tools · Surveying & Construction Layout
Enter your project measurements
Measured inputs · visitor-entered product and design assumptions
1EnterProvide the known values
2CalculateResults update automatically
3VerifyReview the details and units
Try an example
Use verified measurements, machine or vehicle data, qualified procedure values, field cycle observations, and the stated coordinate or unit convention. Values stay in this browser.
Trade calculator result
Enter valid values to see the result.
Your entries are calculated in this browser and are not submitted to 365CALCS.COM.
Solve a distance-distance intersection from two known control points.
Control calculations must preserve raw observations, closure, adjustment basis and residuals so a corrected coordinate never hides the field evidence.
Simple visual explanation
Follow the calculation from field input to decision
1Observe and close the control→
2Apply the stated adjustment→
3Review residuals and tolerance
Each stage is deliberately separate: verify the source values, the calculation basis, and the final field or shop check.
Station 1 eastingStation 1 northingDistance 1Station 2 eastingStation 2 northing
The relationship
Read the formula before using the result
The unknown point lies at the intersection of two entered distance circles.
The calculator preserves full internal precision. Confirm that every entry uses the same measurement condition, unit basis, product or machine data, and scope represented by this formula.
Professional check
Turn the answer into a responsible next step
1. Verify the inputs
Use actual measurements, current drawings, approved specifications, and manufacturer or process data for the real job.
2. Challenge the assumptions
Check allowances, losses, stock or package rounding, operating condition, and whether the result matches an independent measurement or estimate.
3. Respect the boundary
It does not establish a legal boundary, select a datum or projection, certify control, define allowable closure, replace a least-squares adjustment, approve construction tolerances, or authorize work from unverified design data.
Quick guide
How to use this calculator
Choose the calculation mode or measurement system that matches the values you actually have.
Enter measured project dimensions and use product-specific coverage, density, yield, resistance, or waste data where requested.
Review the intermediate results before ordering material or applying the result on site.
Calculation method
Calculation method
The unknown point lies at the intersection of two entered distance circles.
The calculator preserves full internal precision and rounds only displayed results. Quantity outputs round up when whole purchasable pieces are required.
Worked example
Worked example
Controls 12 apart with distances 10 give (6,±8).
The unknown point lies at the intersection of two entered distance circles.
Supported inputs
Precision and limits
Survey control and datum boundary
Coordinate and closure calculations use the grid, datum, azimuth, scale, station, offset, observation and weighting conventions you enter. They do not establish legal boundaries, control quality, allowable closure, grid-to-ground corrections, calibration, or the required professional adjustment method.
Planning scope
This calculator supports measurement, estimating, and scenario planning. It does not inspect a site, select a product, certify a design, or replace drawings, specifications, manufacturer instructions, local codes, permits, or a qualified trade professional.
Measured and product-specific inputs
Nominal dimensions can differ from actual dimensions. Verify inside pipe diameters, actual lumber sizes, product coverage, bag yield, material density, conductor resistance, waste, and packaging against the materials used on the project.
Safety and regulatory limits
Electrical, HVAC, structural, excavation, roofing, pressure, lifting, and life-safety work may require jurisdiction-specific calculations and professional approval. Do not use a generic planning result as a code-compliance or safety determination.
Precision and privacy
Inputs accept bounded plain decimals. Calculations remain in this browser and raw entered project values are not submitted to 365CALCS.COM.
