CALCULATE WITH CONFIDENCE

Trades & Professional Tools · Roofing

Roof Rainwater Harvesting Yield Calculator

Estimate collectible roof water from rainfall depth, projected area, runoff coefficient and first-flush/system losses.

Trades & Professional Tools · Roofing

Enter your project measurements

Measured inputs · visitor-entered product and design assumptions
  1. 1EnterProvide the known values
  2. 2CalculateResults update automatically
  3. 3VerifyReview the details and units
Try an example

Measure using one consistent system. Product coverage, density, resistance, waste, and safety assumptions must come from the actual product data or project specification. Values stay in this browser.

Trade calculator result

—

Enter valid values to see the result.

Your entries are calculated in this browser and are not submitted to 365CALCS.COM.

Feedback

Understand the result

What the Roof Rainwater Harvesting Yield is for

Estimate collectible roof water from rainfall depth, projected area, runoff coefficient and first-flush/system losses.

Roof-drainage arithmetic connects contributing catchment and entered rainfall criteria to gutters, outlets, downpipes, drains, or storage flow.

At a glance

See the field workflow

1Contributing roof area
2Entered rainfall or slope basis
3Flow and component check
Read from measured conditions to the calculated field check. Each stage remains a separate assumption you can verify.
Rainfall depth (mm)Projected roof area (m²)Runoff coefficientFirst-flush and other losses (L)

The relationship

The formula used here

Yield litres=rainfall mm×area m²×coefficient−entered losses.

Apply this relationship only after confirming that the measurements, product basis, allowances, and units describe the same project condition.

Field reading

Use the result as a checked next step

1. Measure the real work

Use field dimensions, approved drawings, and actual product or stock information.

2. Reconcile the result

Keep each drainage area and flow path explicit, then compare results only with the locally applicable design method and approved component data.

3. Keep the boundary clear

It does not establish design rainfall, overflow, hydraulic capacity, outlet spacing, stormwater approval, or flood safety.

Quick guide

How to use this calculator

  1. Choose the calculation mode or measurement system that matches the values you actually have.
  2. Enter measured project dimensions and use product-specific coverage, density, yield, resistance, or waste data where requested.
  3. Review the intermediate results before ordering material or applying the result on site.

Calculation method

Calculation method

Yield litres=rainfall mm×area m²×coefficient−entered losses.

The calculator preserves full internal precision and rounds only displayed results. Quantity outputs round up when whole purchasable pieces are required.

Worked example

Worked example

25 mm on 100 m² at coefficient 0.9 yields 2,250 L before losses.

Yield litres=rainfall mm×area m²×coefficient−entered losses.

Supported inputs

Precision and limits

Roof-system and drainage boundary

Roofing results use measured planes, traced linear components, counted penetrations, product effective coverage, approved fastening/ventilation criteria, local rainfall, and entered drainage capacities. They do not approve a roof assembly, slope, structure, wind or snow resistance, fastener schedule, drainage system, fall protection, warranty, repair, or code compliance.

Planning scope

This calculator supports measurement, estimating, and scenario planning. It does not inspect a site, select a product, certify a design, or replace drawings, specifications, manufacturer instructions, local codes, permits, or a qualified trade professional.

Measured and product-specific inputs

Nominal dimensions can differ from actual dimensions. Verify inside pipe diameters, actual lumber sizes, product coverage, bag yield, material density, conductor resistance, waste, and packaging against the materials used on the project.

Safety and regulatory limits

Electrical, HVAC, structural, excavation, roofing, pressure, lifting, and life-safety work may require jurisdiction-specific calculations and professional approval. Do not use a generic planning result as a code-compliance or safety determination.

Precision and privacy

Inputs accept bounded plain decimals. Calculations remain in this browser and raw entered project values are not submitted to 365CALCS.COM.

Continue calculating

Related calculators