CALCULATE WITH CONFIDENCE

Trades & Professional Tools · Machining & Metalwork

Bonus Tolerance Calculator

Calculate available bonus tolerance at actual mating-envelope size for a hole or shaft and add it to entered MMC geometric tolerance.

Trades & Professional Tools · Machining & Metalwork

Enter your project measurements

Measured inputs · visitor-entered product and design assumptions
  1. 1EnterProvide the known values
  2. 2CalculateResults update automatically
  3. 3VerifyReview the details and units
Try an example

Measure using one consistent system. Product coverage, density, resistance, waste, and safety assumptions must come from the actual product data or project specification. Values stay in this browser.

Trade calculator result

—

Enter valid values to see the result.

Your entries are calculated in this browser and are not submitted to 365CALCS.COM.

Feedback

Understand the job

What the Bonus Tolerance is for

Calculate available bonus tolerance at actual mating-envelope size for a hole or shaft and add it to entered MMC geometric tolerance.

Shop geometry turns drawing requirements and measured features into coordinates, angles, offsets, deviations, or an inspectable setup.

Simple visual explanation

Follow the calculation from field input to decision

Read the drawing basis
Build the measurement geometry
Report a checkable result
Each stage is deliberately separate: verify the source values, the calculation basis, and the final field or shop check.
MMC feature size (mm or in)Actual mating-envelope size (mm or in)Geometric tolerance at MMC (mm or in)

The relationship

Read the formula before using the result

Hole bonus=actual size−MMC size; shaft bonus=MMC size−actual size; total=MMC geometric tolerance+bonus.

The calculator preserves full internal precision. Confirm that every entry uses the same measurement condition, unit basis, product or machine data, and scope represented by this formula.

Professional check

Turn the answer into a responsible next step

1. Verify the inputs

Use actual measurements, current drawings, approved specifications, and manufacturer or process data for the real job.

2. Challenge the assumptions

Check allowances, losses, stock or package rounding, operating condition, and whether the result matches an independent measurement or estimate.

3. Respect the boundary

It does not select safe cutting data, tooling, workholding, coolant, tolerances, gauges, or programs; predict collision, chatter, deflection, or chip control; or certify conformance.

Quick guide

How to use this calculator

  1. Choose the calculation mode or measurement system that matches the values you actually have.
  2. Enter measured project dimensions and use product-specific coverage, density, yield, resistance, or waste data where requested.
  3. Review the intermediate results before ordering material or applying the result on site.

Calculation method

Calculation method

Hole bonus=actual size−MMC size; shaft bonus=MMC size−actual size; total=MMC geometric tolerance+bonus.

The calculator preserves full internal precision and rounds only displayed results. Quantity outputs round up when whole purchasable pieces are required.

Worked example

Worked example

A hole at 10.05 mm with 10.00 mm MMC gains 0.05 mm bonus.

Hole bonus=actual size−MMC size; shaft bonus=MMC size−actual size; total=MMC geometric tolerance+bonus.

Supported inputs

Precision and limits

Machining data, inspection and machine boundary

These tools calculate from the drawing, measured stock, qualified process data, toolmaker cutting data, machine limits, inspection conventions, material properties, observed cycle times and shop costs you enter. They do not select a safe speed, feed, tool, workholding method, coolant, fit, tolerance, gauge, process capability target or machine program; simulate collision, deflection, chatter, chip control or thermal gradients; certify conformance; or replace the governing drawing, standard, toolmaker and machine documentation, qualified procedure and trained machinist or metrologist.

Planning scope

This calculator supports measurement, estimating, and scenario planning. It does not inspect a site, select a product, certify a design, or replace drawings, specifications, manufacturer instructions, local codes, permits, or a qualified trade professional.

Measured and product-specific inputs

Nominal dimensions can differ from actual dimensions. Verify inside pipe diameters, actual lumber sizes, product coverage, bag yield, material density, conductor resistance, waste, and packaging against the materials used on the project.

Safety and regulatory limits

Electrical, HVAC, structural, excavation, roofing, pressure, lifting, and life-safety work may require jurisdiction-specific calculations and professional approval. Do not use a generic planning result as a code-compliance or safety determination.

Precision and privacy

Inputs accept bounded plain decimals. Calculations remain in this browser and raw entered project values are not submitted to 365CALCS.COM.

Continue calculating

Related calculators